Product Description
Final Look |
matte |
Color |
|
Density |
1.73 ± 0.05 g / cm3 |
Viscosity |
|
Solid content in kg % |
71±2% للون الأبيض |
Washability (resistance to wet friction)
|
غير قابل للغسيل بالماء |
Dilution solvent
|
Water |
Dry time
|
Dry face first touch 30 minutes Dryness of the second face to touch 2 - 4 hours Final drought 24 hours |
It must be taken into consideration that the surface to be painted is clean, dry and free from grease, oil, dust and incoherent parts.
In case of painting the old or previously painted surfaces, the non-cohesive or limestone parts should be removed before starting the paint.
It is preferable to paint one face of the combi sealer to ensure that there are no inconsistent parts as it helps to stick strength, increase the individual and ease of use.
The first side of the microplast is softened after turning the product well, by no more than 10%.
Take into account that the time difference between the two sides is not less than 6 hours, and the more than that, the better.